|
|
Post by steamn51 on Sept 24, 2012 7:28:39 GMT 10
Hi all,
About to order some pin spike tires for the sprinter and need some advice with the tire sizes, ie the widths and stagger of the rears.
I think RR is 18.5 and LR is 19.5?
Cheers
Andy
|
|
|
|
Post by robhod on Sept 29, 2012 17:02:18 GMT 10
Hi Andy
Are you in Sydney? Most guys run between 1-2 inch's of stagger some when starting out run zero until they gain experience.
Rob
|
|
|
|
Post by steamn51 on Sept 30, 2012 9:54:34 GMT 10
Hi there Rob,
Thanks for that, I went for 18.5 and 19.5 on the order to BRP, Bob J also said these sizes are a good starting point.
I am in Sydney, I was out there in August with the car I built with beam axle on front and independence rear end.
At that meeting I was also asking about shocks, I need a set of around 130mm eye to eye for the car.
Any advise of which ones, I was told Daves motors for the FG shocks but need to know the correct ones.
Regards
Andy
|
|
