|
|
Post by dave65 on Mar 18, 2012 15:28:18 GMT 10
Hi guys
New to sprint car racing
Was after more info re setting these cars up to race
Shock oils from and back
Which sides need to be harder
Springs
Tyre selection , which circumference sizes to use at each corner
Any help would be great
Dave65
Q69
|
|
|
|
Post by robhod on Mar 18, 2012 17:43:10 GMT 10
Hi Dave
do you have a car already?
Rob
|
|
|
|
Post by dave65 on Mar 18, 2012 19:45:57 GMT 10
Yes
Have a second hand one which I have almost put back together.
Am a on road RC racer, so any help re ride heights shock oils front and back.
Tyers, which ones to use on back re circumference etc.
Any help how to set these up and what to change if you get under steer etc.
Cheers
Q65
Dave65
|
|
|
|
Post by bobjeffreson on Mar 18, 2012 20:22:04 GMT 10
Dave, A good start is this book. A lot of the information... re handling...
A lot transfers directly from full scale to 1/4 scale.
Plus.... it's just a good read for someone that likes sprintcars.... 
I run standard Bishop fronts.
Outside rear .... approx 21 circum.
Inside rear ...approv 18.5 circum.
Every car and driver is different so it becomes a matter of personal preference and what works for you! |
|
|
|
Post by dave65 on Mar 18, 2012 20:43:02 GMT 10
Thanks
Will try and find book to down load.
David
Q65
|
|
|
|
Post by Jezza WA '5' on Mar 18, 2012 23:14:00 GMT 10
one stop book shop should have it
|
|
